The diameter of the new spring should be slightly less than the broken switch .- Assemble in reverse order .- Check that the new spring: it should return to its original position at the closed valve heads and fall head vody.Ten from the push-button pereklyuchatelyPrichina – damaged gland. Remedy – Replace the rubber seal rings: – Close the valve head mixer .- Remove the spout and flexible Remove the hose .- button 4 with the rod 6. To do this, hold the end of the rod with pliers so it does not rotate. Better do it through a cloth so as not to damage the coating rod .- Using a metal rod to remove Remove the adapter .- valve 7 with the rod .- Remove the damaged O-ring seal-3 and put in its place a new switch .- gather in a reverse fault poryadke.Osnovnye mixer with two gated golovkamiObilnaya shadow from under mahovikPrichina fault: the stem of the pin fell out. Remedy – insert the pin in place – access to water shut-off valve to the head – clear flywheel housing with the valve head, as in the case of replacement – seals – with your fingers or pliers, gently pull the rod out of the case for tetrahedral end – insert the rod into the hole the pin using tweezers (or, if you can, with your fingers). Pin must be tight to enter the stem. If he "hangs out" in the hole the rod, then wrap the inserted end of the pin a little flow of water through penki.Postoyannoe spout smesitelyPervym business determine the temperature of the flowing water, if it is warm, the valve is faulty hot water if – the cold, the valve cold vody.Prichiny fault: 1) the uneven edge of the saddle valve seat can golovki.Sostoyanie check visually (with sufficient light) or with a screwdriver, having its end at the edge of the saddle. .